Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Sometimes you will need to synchronize the dataflow in compound component. Let's say you have a component similar to the data-compound presented below:

Let's say you need both data1 and data2 slots form dataProcessor member to be ready for the processedData slot to be set. As you can notice, it is not possible to know which one between data1 or data2 will be the first one to be ready. So we need a way to be sure that both slots are set, no matter the order in which they are loaded. One way you can control this is by:

  1. having a handler method which will perform the desired behavior only when everything needed is ready
  2. calling this method every time the value of a slot, that need to be synchronized, changes; i.e. using the model<Slotid>Changed () (See /wiki/spaces/RTE/pages/22156475)

So in our case, we will handle this in the data-processor component logic. The code would look similar to the one below:

Synchronizing dataflows
...

/* 1. having a handler method which will perform the desired behavior only when everything needed is ready */
_processData: function() {
	if (this.getData1() and this.getData2()) {
		// Process data
		var processedData = ...


		//Set processedData slot
		this.setProcessedData(processedData);
	}
},


/* 2. calling this method every time the value of a slot, that need to be synchronized, changes; i.e. using the model<Slotid>Changed () (See 2.3 | The Cubbles Javascript API) */
modelData1Changed: function(newData) {
    this._processData();
},

modelData2Changed: function(newData) {
    this._processData();
},
...


Some considerations

  • Note the data-processor component is an elementary, and it should be like that since we need to be able to access component logic. Remember, that compounds have no associated logic. In case you don't have a component similar to data-processor you could create an elementary to handle the synchronization and add it to your original mode.
  • If you need additional validation, i.e. not only having the slots set, then you ay create validation methods and call them in the condition of the handler method.
  • You may also consider resetting slots when you want to avoid the handler method to process slots when only one or some of them have changed, i.e. when you want to perform something only when all the slots change


  • No labels